 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CP ULTRA-MINIATURE, LOW PROFILE AUTOMOTIVE RELAY FEATURES 9.5 .374 CP-RELAYS * Simple footprint pattern enables ease of PC board layout Contact terminals 14 .551 13 .512 14 .551 13 .512 9.5 .374 mm inch *Surface mount terminal type is coming soon. * Low profile Coil terminals * "PC board terminal" and "Surface mount terminal" types available SPECIFICATIONS Contact Arrangement Contact material Initial contact resistance, max. (By voltage drop 6V DC 1A) Nominal switching capacity Max. switching voltage Rating Max. carrying current 1 Form A 1 Form C Silver alloy 100 m 20 A 14 V DC (N.O.) 10 A 14 V DC (N.C.) 16 V DC 40 A for 2 minutes 30 A for 1 hour (12 V at 20C 68F) 35 A for 2 minutes 25 A for 1 hour (12 V at 85C 185F) 107 Min. 10 * Min. 2x105*2 Min. 105*3 Min. 105*4 51 Characteristics Max. operating speed (at rated load) Initial insulation resistance*5 Initial breakdown voltage*6 7 6cpm Min. 100M (at 500 V DC) 500 Vrms for 1min. 500 Vrms for 1min. Max. 10ms (at 20C 68F) Max. 10ms (at 20C 68F) Min. 100 m/s2 {10 G} Min. 1,000 m/s2 {100 G} 10 to 100 Hz, Min.44.1 m/s2 {4.5 G} 10 to 500 Hz, Min.44.1 m/s2 {4.5 G} -40 to +85C -40 to +185F 5 to 85% R.H. Approx. 4g .14 oz 20 A 14 V DC Between open contacts Between contact and coil Operate time* Release time (without diode)*7 (at nominal voltage) Functional*8 Shock resistance Destructive*9 Functional*10 Vibration resistance Destructive Conditions in case of Ambient temp operation, transport and storage*11 (Not freezing and Humidity condensing at low temperature) Unit weight Mechanical (at 120cpm) Expected life (min. operations) Resistive load Electrical (at 6cpm) Motor load Lamp load Coil Nominal operating power Remarks 640 mW * Specifications will vary with foreigh standards certification ratings. *1 At nominal switching capacity, operating frequency: 1s ON, 9s OFF *2 N.O.: at 5A (steady), 25A (inrush)/N.C.: at 20A (brake) 14V DC, operating frequency: 0.5s ON, 9.5s OFF *3 At 20A 14V DC (Motor lock), operating frequency: 0.5s ON, 9.5s OFF 4 N.O.: at 5A (steady), 40A (inrush)14V DC, operating frequency: 1s ON, 14s OFF * *5 Measurement at same location as "Intial breakdown voltage" section *6 *7 *8 *9 *10 *11 Detection current: 10mA Excluding contact bounce time Half-wave pulse of sine wave: 11ms; detection time: 10s Half-wave pulse of sine wave: 6ms Detection time: 10s Refer to 5. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT (Page 61) TYPICAL APPLICATIONS * Power windows * Auto door lock * Power sunroof * Hazard flasher * Flasher * Defogger * Power steering * Power seat ORDERING INFORMATION Ex. CP Contact arrangement 1a: 1 Form A 1: 1 Form C 1a SA 12V Coil voltage (DC) 12 V X Mounting classification Nil: PC board terminal SA: Surface-mount terminal* Packing style Nil: Tube packing X: Tape and reel packing (picked from the NC terminal side) Z: Tape and reel packing (picked from the coil terminal side) *Only for 1 Form C type Notes: 1. Standard packing: Carton (Tube): 40 pcs.; Case: 1,000 pcs. 2. Tape and reel packing: Carton (Tape and reel): 300 pcs.; Case: 900 pcs. 3. Surface-mount terminal type are available only for tape and reel packing. 4. 24 V DC type is also available. Please consult us for details. 352 CP TYPES 1. PC board terminal type Contact arrangement 1 Form A 1 Form C Coil voltage 12 V DC 12 V DC Part No. CP1a-12V CP1-12V 2. Surface mount terminal type Contact arrangement 1 Form C Notes: 1. Tape and reel (picked from N.C. terminal side) is also available by request. Part No. suffix "-x" is needed when ordering. (ex) CP1SA-12V-X 2. Tape and reel packing symbol "-z" or "-x" are not marked on the relay. 3. 24 V DC type is also available. Please consult us for details. Coil voltage 12 V DC Part No. CP1SA-12V-Z COIL DATA (at 20C 68F) Nominal voltage, V DC 12 Pick-up voltage, V DC (max.) (initial) 7.2 Drop-out voltage, V DC (min.) (initial) 1.0 Coil resistance (10%) 225 Nominal operating current mA (10%) 53.3 Nominal operating power mW 640 Usable voltage range, V DC 10 to 16 mm inch Schematic (Bottom view) 1a 14.0 .551 9.5 .374 0.4 .016 3.5 .138 0.4 .016 5.0 .197 1.0 .039 1.7 .067 5.4 .213 NC 1.5 .059 6.0 .236 6.0 .236 10.7 .421 COM 2.0 .079 COIL 2-1.3+0.1 dia. 2-.051+.004 dia. 6 2 .236 .079 10.7 .421 (R) DIMENSIONS 1. PC board terminal type 13.0 .512 NO Max. 1.0 .039 A* 0.4 .016 1.5 .059 Pre-soldering 0.3 .012 COM COIL 2-1.3+0.1 dia. 2-.051+.004 dia. 6 2 .236 .079 10.7 .421 PC board pattern (Bottom view) 1a 2-0.9+0.1 2-.035+.004 2-2.0+0.1 2-.079+.004 4.5 .177 (R) 1c 1c 5 .197 5.4 .213 2-0.9+0.1 2-.035+.004 2-2.0+0.1 2-.079+.004 4.5 .177 NO Dimension: Max. 1mm .039 inch: 1 to 3mm .039 to .118 inch: Min. 3mm .118 inch: General tolerance 0.1 .004 0.2 .008 0.3 .012 * Dimensions (thickness and width) of terminal specified in this catalog is measured before pre-soldering. Intervals between terminals is measured at A surface level. 2. Surface mount terminal type 14.0 .551 13.0 .512 Recommendable mounting pad (Top view) 6.0 .236 4.2 .165 0.3 .012 3.8 .150 4.4 .173 1.4 .055 1.7 .067 1.5 .059 1.5 .059 1.4 .055 4.8 .189 4.8 .189 4.7 .185 4.0 .157 4.8 .189 2.0 .079 2.5 .098 2.5 .098 2.0 .079 9.1 .358 10.5 .413 Pre-soldering 0.4 .016 1 .039 5 .197 0.4 .016 0.4 .016 1.5 .059 5.4 .213 1.5 .059 6.0 .236 2 6.0 .236 .079 10.7 .421 Dimension: Max. 1mm .039 inch: 1 to 3mm .039 to .118 inch: Min. 3mm .118 inch: General tolerance 0.1 .004 0.2 .008 0.3 .012 353 CP REFERENCE DATA 1. Coil temperature rise Tested sample : CP1-12V, 6pcs Point measured : Inside the coil Contact carrying current, 5A, 10A, 15A, 20A Resistance method, ambient temperature 85C 185F 100 20A 2-(1). Electrical life test (at rated load) Tested Sample : CP1-12V Quantity : n = 4 (NC = 2, NO = 2) Load : Resisitive load (NC side : 10A 14 V DC, NO side : 20 A 14 V DC) Operating frequency : ON 1s, OFF 9s 10 Contact welding: 0 times Miscontact: 0 times Temperature rise, C 80 15A 60 10A 5A 40 Pick-up and drop-out voltage, V Contact welding : 0 time Miscontact : 0 time 8 Pick-up voltage 6 Max. X Min. 4 20 Drop-out voltage 2 Max. X Min. 0 5 10 0 12 14 16 0 Coil applied voltage, V No. of operations, x 104 2-(2). Electrical life test (Motor free) Tested Sample : CP1-12V, 3pcs. Load : 5A, Inrush 25A, Brake current 15A, Power window motor load (Free condition). Operating frequency : ON 0.5s, OFF 9.5s 10 Contact welding: 0 times Miscontact: 0 times Pick-up and drop-out voltage, V Contact welding : 0 time Miscontact : 0 time 8 Circuit : Sample Pick-up voltage 6 Max. X Min. 4 Drop-out voltage 2 M Max. X Min. 0 0 10 20 No. of operations, x 104 2-(3). Electrical life test (Lamp load) Tested sample : CP1-12V, 3pcs. Load : 5A, Inrush 40A, 14VDC lamp load Operating frequency : ON 1s, OFF 14s 10 Contact welding: 0 times Miscontact: 0 times Pick-up and drop-out voltage, V Contact welding : 0 time Miscontact : 0 time 8 Pick-up voltage 6 Circuit : Sample Max. X Min. 4 Drop-out voltage 2 Max. X Min. 0 5 10 Lamp 0 No. of operations, x 104 For Cautions for use, see Relay Technical Information (Page 48 to 76). 5354 5/27/2002 All Rights Reserved, (c) Copyright Matsushita Electric Works, Ltd. Go To Online Catalog |
Price & Availability of CP1SA-12V-Z
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |